The BatteryProtect disconnects the battery from non essential loads before it is completely discharged (which would damage the battery) or before it has insufficient power left to crank the engine.
Solid state relay for use with 12/24 Volts DC
Operating voltage range 6-35 Volts
Maximum continuous current 220 Amps
Maximum peak current 600 Amps (30 seconds)
Power consumption max 1.5 mA
Alarm output delay 12 seconds
Load disconnect delay when triggered by BMS is instanteneous
Load disconnect delay when triggered by low voltage of 10.5 or 21 Volts is 90 Seconds
Load reconnect delay 30 seconds when voltage gets to 12 or 24 Volts
The BatteryProtect disconnects the battery from non-essential loads before it is completely discharged (which would damage the battery) or before it has insufficient power left to crank the engine. The BatteryProtect automatically detects system voltage (12 or 24 volts)
