13823-180HP 180 Amp HP High Amp Alternator

The Denso Hairpin 180 Amp HP series high output alternator produces 180 amps at 1800 engine RPM and 120 amps continually at low idle while capable of up to a 75% generation efficiency. The rectifier is mounted onboard the alternator and consists of 12 40 amp press fit diodes. The brush holder assembly and slip ring are environmentally protected and the bearings are heavy-duty, oversized premium bearings. The alternator housings are precision-machined cast aluminum and all components are of OEM quality. All components have been carefully chosen for maximum performance and reliability in Dodge Ram vehicles with the 5.2L V8 engine.

Quick Overview

Technology This new charging system features an advanced proprietary stator winding of a new design that maximizes efficiency with near 80 percent sectional density of the winding coupled with very low coil resistance. This gives the alternator maximum low speed output, as well as a 90% reduction of magnetic pulsation with the stator windings built in cancel circuit to minimize electrical noise. The internal regulator is a proprietary design advanced multifunction digital regulator that completely integrates into the 2000 Dodge Ram’s PCM through the OEM wiring harness to retain all the Dodge Ram’s specific functions such as internal temperature compensation, lamp terminal monitoring, load response control, and alternator load factor.

Mounting The Denso Hairpin 180 Amp HP series alternator is specially designed to mount directly in the OEM mounting location of the Dodge Ram with no modification needed. All electrical connections shall be in the original locations. The alternator features a custom machined drive pulley for increased output at idle speeds and retains OEM belt length. The pulley is 7 Groove Hard Anodized 6061 Billet Aluminum and hard anodized coating for wear resistance and durability.

Performance The 2000 Dodge Ram’s OEM alternator is rated approximately at 100 amps with 65 amps at idle. The Denso Hairpin 180 Amp HP series high output alternator produces 120 amps at the true operating idle level of a 2000 Dodge Ram with the 5.2L V8 engine. The 2000 Dodge Ram needs approximately a maximum of 100 amps to supply existing electrical loads with all accessories on leaving little room for additional accessories. The Denso Hairpin 180 Amp HP series high output alternator will supply an additional 55 amps of available output at hot idle output, and 55 amps additional at cold idle output, and up to 80 amps at highway speeds. By upgrading to the Denso Hairpin 180 Amp HP series high output alternator, the Dodge Ram’s computer systems and accessories will be supplied with adequate power when it’s needed most.

Durability The Denso Hairpin 180 Amp HP series alternator is manufactured to the highest quality standards in the USA with premium USA made or sourced components for the highest quality possible. All of our high output alternator's parts are carefully chosen for the maximum durability, dependability and proven performance in the field. This DC Power High Output Denso Hairpin 180 Amp HP series alternator has been specifically designed for the 2000 Dodge Ram 5.2L V8 which in return will provide a pain-free installation.

Please note that there is a 3-3.5 to 1 ratio.
EX: 100 Engine RPM = 300 Alternator RPM.

This DC Power 180 Amp HP Series Alternator fits these following vehicles:

1999 Dodge Dakota 3.9L V6
2000 Dodge Dakota 3.9L V6
1999 Dodge Dakota 5.2L V8
2000 Dodge Dakota 5.2L V8
1999 Dodge Dakota 5.9L V8
2000 Dodge Dakota 5.9L V8
1999 Dodge Ram 5.9L V8
2000 Dodge Ram 5.9L V8
1999 Dodge Ram 8.0L V8
2000 Dodge Ram 8.0L V8
1999 Dodge Ram 3.9L V6
2000 Dodge Ram 3.9L V6
1999 Dodge Ram 5.2L V8
2000 Dodge Ram 5.2L V8
1999 Dodge Durango 3.9L V6
2000 Dodge Durango 3.9L V6
1999 Dodge Durango 5.2L V8
2000 Dodge Durango 5.2L V8
1999 Dodge Durango 5.9L V8
2000 Dodge Durango 5.9L V8